The actual hood is jumped. New battery is placed on the second electric battery tray on the driver’s facet of the vehicle. It is secured using 3/8 half inch ratchet and socket. Employing drill the battery isolator system kit is placed on the fender well. Afterward the metal screws and the tools that comes with the battery isolator system kit are self-tapped . The length of 4 gauges dual powered battery cable run from your positiv
e terminal in the first battery towards the terminal on the battery isolator kit kit on the right hand aspect. The end of each part of the wire will be stripped about half inch from the end and a terminal on to both ends is crimped using a fatal crimper. The positive fatal from the first battery is connected to the incurable using a 3/8 inch ratchet as well as socket.A Several gauge battery cable runs from the constructive terminal of the second dual battery to the airport terminal on the battery isolator package on the left hand side. The finish of each side from the wire is candy striped about half inch from the end. A critical on to each end is actually crimped using a terminal crimper. Now will be the exact terminal accurate about the second battery is actually connected to the terminal on the isolator using a 3/8 inch ratchet and socket.
A 17 gauge wire manage from the ignition terminal on the battery isolator package kit through a grommet within the firewall and the above one is made to cost the steering ray on the interior. The wire is probed while using the test light and also the ignition is considered the on situation then off that. this is done to check the options. An ignition direct is there when the mild turns on when it is upon and turns off of when it is off. Your 18 gauge cord is connected to the key wire using a blue Scotchlok connector.
The cable strippers are used to strip ¼ half inch off the other end of the 18 gauge cord. A ring terminal can be crimped on to the end from the wire using the line crimpers. the wire is definitely connected to the ignition incurable on the battery isolator kit using a 3/8 inch ratchet as well as socket.
A 20 gauge wire operate from the ground incurable on the battery isolator set to the ground source on the frame. a cord is bolted to the body on the passenger aspect. A ring terminal is actually crimped on both sides from the wire using wire crimpers and it is bolted to the ground position and the battery isolator kit using a 3/8 inch ratchet and also socket.
A 4 gauge wire goes from the negative airport terminal on the second power supply to the ground source for the frame. A 50 percent inch on each side is striped along with a battery terminal can be crimped using terminal crimpers. Your cable is bolted using the same procedure.